Brother RH-9820 - Manual (Page 3)

English Chinese Japanese
Operation panel easy to use for everyone
The RH-9820 is equipped with a liquid crystal
display (LCD) and indicates display items with
icons and letters. Setting and check of sewing
patterns and change of sewing modes are easy
to understand and carry out.
Shortcut keys
Frequently-used settings such as sewing speed
and sewing length can be quickly set.
Setting with one-touch key operation
The needle is rotated to make the needle’s
eye face front, enabling easier threading.
The material setting position (Front/
Back) can be set.
The timing of buttonhole cutting (Be-
fore sewing/After sewing) can be set.
Fine adjustment can easily be made
Fine adjustment such as cutting space and knife
position compensation can be made on the LCD
panel. As the items are shown with icons,
operators can operate intuitively without the
instruction manual.
Production counter
The number of buttonholes sewn can be counted
up to 999,999.
Sewing length ranges in -02 spec. are increased
In -02 spec., the range of sewing length with
each gauge has been increased to 8 mm. The
wider gauge ranges reduce the trouble of gauge
replacement.
* Change of the ranges L1422-L3442 is available by replacing gauge parts.
(For details, please consult your place of purchase.)
Ranges of gauges (sewing length)
Special specification (-02-L1826*) in Short-cut upper & lower thread trimmer spec.
With -02-L1826 spec., one single machine sup-
ports a wide range of applications, from straight-
bartack buttonholes for casual pants to taper-
bartack buttonholes for jeans. Sewing length of
this spec. is 18-26 mm.
* Special specification for Chinese market
Multilingual display
Display with icons and letters, easy to understand
18-26 mm 18-26 mm
Conventional
model
RH-9820
* L2230 is the standard.
Cycle sewing
Up to 9 programs, each with up to
9 steps, can be stored.