Radio mode, Setting the sensitivity of station seek tuning, Storing stations – Blaupunkt Acapulco MP54 User Manual
Page 14: Storing stations automatically (travelstore), Listening to stored stations
57
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Note:
●
When using this feature, you will
only be able to switch to stations
that you have received once before
already. To receive the stations,
use the Scan or Travelstore func-
tion.
Setting the sensitivity of station
seek tuning
You can choose whether the radio
should only tune into stations providing
good reception or whether it can also
tune into those with a weak reception.
➮
Press the MENU button
9
.
“TUNER MENU” appears in the display.
➮
Press the OK button
:
to display
the tuner menu.
➮
Press the or button
7
repeat-
edly until “SENS” appears in the
display.
The display shows the currently set sen-
sitivity level. “SENS HI3” means that the
tuner is set to the highest sensitivity
setting. “SENS LO1” means it is set to
the lowest sensitivity setting.
➮
Set the sensitivity level that you
want using the
buttons
7
.
When you have finished making your
changes,
➮
press the MENU button
9
.
Note:
●
You can set different sensitivity lev-
els for FM and MW or LW (AM).
Storing stations
Storing stations manually
➮
Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW).
➮
Tune into the station that you want.
➮
Press and hold down one of the
station buttons 1 - 3
6
or 4 - 6
;
for longer than two seconds to as-
sign the station to that button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions providing the best reception in the
region (only FM). The stations are stored
in the FMT memory bank.
Note:
●
Any stations that were previously
stored in this memory bank are de-
leted in the process.
➮
Press and hold down the BND•TS
button
4
for longer than two sec-
onds.
The storing procedure begins. “TRAV-
EL STORE” appears in the display. Af-
ter the process has completed, the ra-
dio will play the station that is stored in
memory location 1 of the FMT memory
bank.
Listening to stored stations
➮
Select the memory bank or wave-
band.
➮
Press the station button 1 - 3
6
or
4 - 6
;
that the station you want
to listen to is assigned to.
RADIO MODE