Buhler 25 Series - Manual (Page 25)

25 Series Rotary Tiller
21
SERVICING INTERVALS
The periods recommended below are based on normal operating conditions. Severe or
unusual conditions may require more frequent lubrication or oil changes.
8 Hours or Daily; Telescoping Tubes and Quick Disconnect 20 Hours
1. Lubricate PTO driveline (7 locations).
ALERT: When using the safety chains supplied with the PTO shaft, the
shield bearings must be kept lubricated.
80 hours or once a season:
2. Lubricate rotor driven end
bearing (1 location)
3. Lubricate rotor drive end
bearing
(1 location).
4. Lubricate chain drive
bearing
(1 location)
- use 3 squirts only
- push grease in gradually