Bowers & Wilkins DM16 - Manual

DM16
Floor-standing loudspeaker system
Product Summary
● As the top of the line model in B&W’s DM Series, The DM16 represents the ultimate integration
of high style and performance.
● Without resorting to professional studio-style configurations, the DM16 incorporates many of
B&W’s major technological innovations; including the use of polymer driver cones and domes.
Technical highlights
● B&W’s ability to reduce the number of crossover network components to an absolute minimum
means that the signal has a more direct path to the drivers – an advantage which produces a
cleaner, more linear performance. B&W’s patented APOC Circuit protects both systems
against excessive overload.
● The enclosures have matched the design simplicity with the beauty of real wood veneers.
Their high density, bevel wedged front baffles are more than just visually pleasing – the bevel
actually helps top reproduce diffraction and so improve dispersion.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Drive Units
Frequency Response
1 x 26mm polyester weave dome
26mm dia. high temperature voice coil
1 x 100mm midrange polymide fibre
matrix cone
1 x 220mm bass driver diameter
thermo-plastic cone with PVA compound
coating
65Hz – 20kHz ± 2dB free-field
Sensitivity
Nominal Impedance
Power Handling
Dimensions
Finish
87dB spl (2.83V, 1m)
8 ohms
15W Automatic Overload Protection
Circuit (APOC)
Height: 950mm Width: 335mm
Depth: Max 415mm Min 310mm
Teak, walnut or black ash