Philips 25TR15C - Manual (Page 7)

JOHN: Why did they move the
meeting up to this week?
MARSHA: I don't know, but they
are pushing to close the deal.
S T ATUS
P OWER
M E NU
MUT
E
SUR
F
-
CH
CH VOL
VOL
1
SMART
SLEEP
2
3 4
5
6 7
8
9 0
2
3
CAPTION 1 CAPTION
VOL. BAR
EXIT
SETUP
BRIGHTNESS
PICTURE
1
6
CC
CAPTION 2
OFF
CC W MUTE
C losed Captioning allows
you to read the voice
content of television pro-
grams on the TV screen.
Designed to help the hearing
impaired, this feature uses
on-screen "text boxes" to
show dialogue and conversa-
tions while the TV program is
in progress.
Note: Broadcast stations will
often use spelling abbrevia-
tions, symbols, dropouts and
other grammatical shortcuts
in order to keep pace with the
on-screen action. These type
factors vary upon the source
of the captioned text material
and do not indicate a need
for service on the part of the
TV.
C LOSED C APTIONING
Press MENU (M)
button on the remote, then
press the CHANNEL ▲ or ▼
(or press the MENU ▲ or ▼
buttons on the TV) to select the
word CAPTION with the TV’s
on-screen Arrow.
Press VOLUME (+) or (-)
buttons to select the desired
Closed Caption (CC) mode -
For Example: CAPTION 1.
Note: Usually “CAPTION 1" is
the most used mode to view
captioned material.
Remember,
not all TV
programs and prod-
uct commercials are
made for broadcast
with Closed
Caption (CC) infor-
mation included.
Neither are all
Closed Caption
modes (CAPTION
1 or 2) necessarily
being used by a
broadcast station
during the transmis-
sion of a closed
caption program.
Refer to your area's
TV program listings
for the stations and
times of Closed
Caption shows.
S MART
H ELP
O
N
-S
CREEN
MENU C
ONTROLS
(
CONTINUED
)
Press the STATUS but-
ton after making your Caption
mode selection. The TV dis-
play will clear and Captioning
material (if available on the
currently selected TV program)
will appear on the TV screen.
To cancel, set the CAPTION
feature to OFF when finished
viewing.
CAPTION 1 or 2 mode: dialogue (and descriptions) for
the action on the captioned TV program shows on-screen.
(See Smart Help on this page.)
BEGIN
C
APTION
This symbol will appear
with channels that contain
Closed Captioning material.
NOTE: The “CC W/MUTE” set-
ting automatically switches the
TV to the Closed Caption 1 mode
whenever the MUTE button (on
the remote control) is pressed.
The Closed Caption 1 mode will
turn OFF when the TV sound is
returned or unmuted.
Round Cable 75
Ω
* A single solid antenna wire normally matched with a metal
plug (F-type) end connector that screws (or pushes) directly onto a 75 Ohm input
found on the Television or VCR. (Also known as Coaxial Cable.)
Display * An on screen message or graphics that help the user operate and adjust
his Television feature controls. See On Screen Displays (OSD).
Jack Panel * Refers to the area on the back of the TV cabinet where the input and
output connections are located.
On Screen Displays (OSD) * Refers to the wording or messages generated by the
television (or VCR) to help the user with specific feature controls (color adjust-
ment, programming, etc.).
Menu * An on-screen listing of feature controls shown on the Television screen
that are made available for user adjustments.
Programming * The procedure of adding or deleting channel numbers into the
Television’s memory circuits. In this way the Television “remembers’’ only the
locally available or desired channel numbers and skips over any unwanted channel
numbers.
Remote Sensor Window * A window or opening found on the Television control
panel through which infrared remote control command signals are received.
Smart Picture * Refers to factory set picture adjustments for specific types of view-
ing. Example; Movies, Video Games, Weak Signals or Sports.
Smart Sound * An option that will even out the volume levels from channel to chan-
nel and programs to commercials.
Status * Allows the user to quickly confirm what channel number is currently being
viewed. Status can also be used to clear the Television of on screen displays or infor-
mation (rather than waiting for the displays to “time out” or automatically disappear
from the screen).
Twin Lead Wire * The more commonly used name for the two strand 300 Ohm
antenna wire used with many indoor and outdoor antenna systems. In many cases this
type of antenna wire requires an additional adapter (or balun) in order to connect to
the 75 Ohm Input terminals designed into the more recent Televisions and VCRs.
Volume Bar * When in the ON position, this feature displays an on-screen display
of the TV’s volume setting.
G
LOSSARY
7 - IB7753 E001