Clock/timer – Philips MCM704D-37 User Manual

Page 27

Advertising
background image

English

27

Clock/Timer

Setting the clock

1

In Standby mode, press and hold CLOCK on
the remote until the time flashes on the display.

➜

”

SET CLOCK” is displayed briefly. Then, the

hour digits flash on the display screen.

2

Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
hours.

3

Press CLOCK to confirm.

➜

The minute digits flash on the display screen.

4

Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.

5

Press CLOCK again to confirm the clock
setting.

Notes:
– This system only supports 12-hour mode.
– The clock setting will be erased when the system
is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.

Viewing the clock

●

Press CLOCK in the active mode.

➜

The clock time is displayed.

Setting the timer

●

The system can be used as an alarm clock,
whereby the CD, USB, TUNER, AUX is switched
on at a set time. The clock time needs to be set
first before the timer can be used.

●

During setting, if no button is pressed within 30
seconds, the system will exit timer setting mode
automatically.

1

Press and hold SLEEP/TIMER on the remote
control until the time flashes on the display.

➜

”

SET TIMER” is displayed briefly. Then, the

hour digits flash on the display screen.

2

Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
hours.

3

Press SLEEP/TIMER to confirm.

➜

The minute digits flash on the display screen.

4

Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.

5

Press SLEEP/TIMER to confirm the time
setting.

➜

”

OFF” flashes on the display screen.

6

Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to select
“ON”.

➜

icon appears on the display screen.

To deactivate the timer

●

Select “OFF” at Step 6.

Activating and deactivating
SLEEP

The sleep timer enables the system to switch off
by itself after a set period of time.

●

Press SLEEP/TIMER on the remote control.

➜

The display shows one of the sleep time

options in the following sequence:

SLEEP-OFF,

SLEEP-10, SLEEP-20, ... SLEEP-90,

SLEEP-OFF ... Once the sleep funtion is
activated, the

SLEEP icon will be displayed.

●

To deactivate, press SLEEP/TIMER on the
remote control once or more until OFF is
shown, or press STANDBY-ON/ ECO
POWER
B (or B on the remote).

➜

SLEEP disappears.

pg001-031_MCM704D_37-Eng

2007.4.7, 14:51

27

Advertising
This manual is related to the following products: