Ooking, Elevision, Av 5 i – Philips 34PW862H User Manual

Page 5

Advertising
background image

H

OOKING

UP

THE

T

ELEVISION

T

he AV5 Input Jacks provide High Definition Video Inputs at
1080i or 480p, for accessories like a HD Receiver and Digital

DVD Players. There is also a DVI jack supplied allowing encrypt-
ed transmission of uncompressed HD content. .

1

Connect the Component (Y, Pb, Pr) Video OUT jacks
from the HD accessory device to the (Y, Pb, Pr) AV5
IN(put) jacks on the TV. If the device your using is
equipped with separate Horizontal and Vertical sync, con-
nect the H and V Outputs on the accessory device to the H
and V Inputs of AV5 IN.

2

Connect the red and white AUDIO CABLES to the Audio
(left and right) output jacks on the rear of the HD accessory
device to the Audio (L and R) AV5 IN(put) jacks on the TV.

3

Connect a DVI cable from the DVI OUT on the HD acces-
sory device to the AV5 DVI jack on the back of the TV.

4

Connect a 75

round cable from the OUT TO TV jack on

the HD accessory device to the 75

Ω IN on the back of the

TV.

5

If using a Satellite Dish, Cable signal or Antenna signal,
connect the 75

round cable from a Satellite Dish to the

SATELLITE IN and/or the Cable and Antenna signals to the
ANTENNA “A” or “B” IN on the back of the HD accessory
device.

6

Press the AV button on the remote control repeatedly to
tune to the AV5 channel.

Your now ready to use your digital device to begin playback of
high definition quality.

U

SING THE

AV 5 I

NPUT

J

ACKS

HD1

HD2

OUT TO TV

SATELLITE

IN

DIGITAL AUDIO

OUTPUT

VCR

CONTROL

S-VIDEO

PHONE JACK

VIDEO

AUDIO

L

L

R

R

ANTENNA B

IN

ANTENNA A

IN

5

5

5

COMPONENT VIDEO

Y

Pb

Pr

AV5

1

2

3

4

H

V

SYNC OUT

1

2

6

JACK PANEL

ON BACK OF TV

BACK of

ACCESSORY

DEVICE

Note: If the AV5 channel is tuned and no signal
connection present, the screen could jump or flash.

AUDIO IN

(RED/WHITE)

COMPONENT

VIDEO

CABLES

DVI CABLE

COAXIAL CABLE

LEAD-IN FROM

SATELLITE DISH

COAXIAL CABLE

LEAD-IN FROM
ALTERNATE RF

SIGNAL SOURCE

COAXIAL CABLE

LEAD-IN FROM CABLE

OUTLET, CONVERTER BOX,

OR VHF/UHF ANTENNA

DVI - DVI is a specific digital input allowing encrypted trans-
mission of uncompressed HD content. DVI includes HDCP
(high-bandwidth digital content protection), which is supported
by Hollywood, satellite providers, and most of the consumer
electronics industry. DVI is gaining momentum and quickly
becoming an industry standard for the consumer to view high-
definition material while keeping content protected.
NOTE: The Picture-in-Picture (PIP) feature is not available for
use with AV5.

c

c C

HECK

I

T

O

UT

NOTE: This television is designed to accept high definition
signals 1080i and 480p as specified by the Electronic Industries
Association standard EIA770.3. Digital devices from different
manufacturers have the possibility of differing output standards
which my cause difficulties for the television to properly dis-
play.

HORIZONTAL

AND VERTICAL

SYNC CABLES

5

Advertising
This manual is related to the following products: