Philips Norelco Shaver 2100 Series 2000 dry electric shaver 6948XL-41 CloseCut heads Flex & Float system 35 min shaving 8 hour charge - Manual (Page 6)

10
ENGLISH ENGLISH
11
C
1 Connect cord directly to razor. Connect
the charging plug into any 100V to 240V AC
outlet. Use only the power cord provided.
◗ An adaptor plug may be necessary for charging
plug usage in some foreign countries. Use an
attachment plug adaptor of the proper
configuration for the power outlet.
The razor will automatically convert to work on
100V to 240V AC systems.
◗ As you charge razor, the Charging Light will
light up to indicate razor is charging.
2 Charging and recharging requires
8 full hours. A fully charged razor has a
cordless shaving time of up to 35 minutes.
Recharging
1 Recharging requires 8 hours.
2 When razor is fully charged, disconnect the
charging plug from outlet.
Do not keep razor permanently plugged into
outlet.
11
Before First Use
◗
Charge the razor before you start using
it (see ‘Charging’). Make sure the razor is
switched off before you start charging it.
Important
◗
Only use the power cord provided to charge
the razor.
Charging
◗
Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.
◗ Charging or recharging at temperatures below
40°F and higher than 95°F adversely affects
lifetime of batteries.
◗
Continuously recharging or continuously using
as a corded razor will reduce life of batteries.
◗ You may also shave using the power cord
provided. This razor will not recharge while
being used corded.
◗ Charging and recharging requires a full
8 hours.
◗ If razor has not been used for at least 1
month, razor must be recharged for 8 full
hours.