Philips VRA211AT - Manual (Page 29)

ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON – – : – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
6
Press two Number buttons for the hour you want the
recording to begin. Press two Number buttons for the
minute you want the recording to begin. Press 1 for AM
or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF – – : – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Timer Recording (cont’d) 29
4
Use the Number buttons (1 - 8) to select a slot in which
to store the timer recording. There are eight slots. Numbers
for open slots will flash on-screen.
NOTE: If you enter a number for a slot that has already been used to
store a timer recording, PREVIOUSLY SET PROGRAM will appear on-screen
briefly. Information about the program in that slot will appear on-screen. If
this happens, press the STATUS/EXIT button, then select another number.
5
Use the Number buttons to enter the channel you want
to record.
● Cable Users, enter channel numbers as a two-digit number for
the quickest results. For example, to select channel 6, press
0,6. If you only press the Number 6 button, channel 6 will be
selected after a brief delay.
There also may be a brief delay when
you select channels 10, 11, and 12. If you want to select chan-
nels 100 and above, enter channel numbers as a three-digit
number. For example, to select channel 117, press 1, 1, 7.
Antenna Users, enter channel numbers as a two-digit number
for the quickest results. For example, to select channel 5, press
0,5. If you only press the Number 5 button, channel 5 will be
selected after a brief delay. You may only select channels 2-69.
● If you are recording from line input, press 0,0 to select A/V IN.
● If you are using a Cable Box/DBS, select the Cable Box/DBS
output channel (03 or 04). Set the Cable Box/DBS to the chan-
nel you want to record. Leave the Cable Box/DBS on for the
timer recording. See page eight for details.
7
Follow the instructions in step 6 to enter the recording’s
stop time. (AM or PM will be set automatically.)
Instructions continue on page 30.
4-7
VOL
CH
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
MEMORY REC/OTR
SPEED
ALT. CH
PAUSE/STILL
MUTE
TV VCR
F.FWD REW
PLAY
STOP
VCR/TV EJECT
MENU CLEAR
• Entries that do not match the VCR’s
clock or calendar will cause a ques-
tion mark to appear on-screen.
Helpful Hint