Philips 20PT9007D-17 - Manual (Page 19)

MASTER ENABLE AND CHILD LOCK CONTROL
arental control includes Master Enable and Child Lock features. Master Enable is a master switch for
Parental Control. Parental Cont
rol cannot take effect unless Master Enable is activated. When a password is set,
Master Enable is automatically enabled.
P
Follow these steps for Digital Mode and Analog Mode.
Press MENU button on the remo
te control to
display onscreen menu.
Press CURSOR or to scroll through the
onscreen menu until you see Parental Control
highlighted. Press CURSOR or and you are
required to enter the password you have se
t. If
you enter a w
rong password, Incorrect
Password! will appear.
Then you have to try again.
Only with a correct password, you have access to
PARENTAL CONTROL menu.
Within the Parental
Contro
l menu, you can see Master Enable is set
to .
Press CURSOR or to highlight Master
Enable. If you use CURSOR or to change
the setting of Master Enable to , Master
Enable is de
activated and then password
protection is cancelled.
Press CURSOR or to highlight Child Lock.
If you want to lock the buttons on the front panel,
use CURSOR or to set to . Then the
message Child Lock! Press any key to remove
this message will appear when any button on the
front panel is pressed.
And you can operate the TV
with the remote control only.
,,
,,
,,
MAIN MENU
Exit
Picture
Setup
Parental Control
Time
Go back
Password
_ _ _ _
PARENTAL CONTROL
Go back
V-chip Setting
Master Enable
Child Lock
Change Password
PARENTAL CONTROL
Go back
V-chip Setting
Master Enable
Child Lock
Change Password
,, ,,
OK
,,
19
NOTE: the following menu illustrations are given for Analog mode only.
When finished, press CLEAR button to clear the
menu from
the TV screen.
NUMERIC