Philips 20PT9007D-17 - Manual (Page 25)

SLEEP TIMER
he Sleep Timer feature allows you to set a timer to automatically turn the TV off after
a period of time you
choose - ranging from 10 to 240 minutes in 10 minute intervals.
T
Follow these steps for Digital Mode and Analog Mode.
Press SLEEP button on the remote control to
display the sleep timer menu.
Press SLEEP button on the remote control repeatedly
to select the amount of time (10, 20, ..., 240min) be
fore
the TV automatically switches off. The cycle includes
Off option. If set to O ff, sleep timer is off. Sleep 10min.
When finished, press CLEAR button to clear the menu
from the TV screen.
HOW TO USE ZOOM CONTROL
25
NOTE: TV Switching Off will appear during the last
minute before the TV switches off.
If there is any operation
done during the last minute, sleep timer is cancelled.
,, ,,
he Zoom Control feature allows you to select the picture format mode. This feature is only available in
Digital Mode. T
Press ZOOM button repeatedly on the remote
control to select one of the screen format options
namely 4:3, Expand 4:3, Stretch 4:3 and
Compress 16:9.
4:3 Shows picture in 4:3 aspect ratio format. You
will see two black borders at the top and
bottom of the screen.
Expand 4:3 Expands the picture vertically.
Stretch 4:3 Expands the picture horizontally eliminating
the side borders on both sides of the TV
screen.
Compress 16:9 Expands the picture horizontally delivering a
home-cinema experience
. The display effect
is similar to 4:3.
Selecting a Picture Format Using the Remote Control
Picture Format Modes
ZOOM
H
ELPFUL
H
INTS
Picture Format Mode only can be activated when you
are watching 16:9 programs.
Press Ana/Dig button on the remote control to toggle
between Digital and Analog Mode.