Brother HL-1650/1670N - Manual (Page 44)

1-34
When you use labels, open the Face up output tray.
When you use transparencies, print to the Face down output tray.
Fig. 1-25
☛ ☛ ☛ ☛ 3.
Place paper in the Multi-purpose tray so it touches the back of the tray and
remains below the limit mark.
Fig. 1-26
✒ ✒ ✒ ✒
Note
When you place paper in the Multi-purpose tray, note the following:
•
If you will be printing on paper that weighs more than 135 g/m 2 (36 lbs),
use the face up output tray.
•
Insert the leading edge of the paper first and push it gently into the tray.
•
The printed side must be face up.