Environment, Environment -11 – Brother HL-1650/1670N User Manual
Page 21
CHAPTER 1 ABOUT THIS PRINTER
1-11
E
E
n
n
v
v
i
i
r
r
o
o
n
n
m
m
e
e
n
n
t
t
Use the printer only within the following ranges of temperature and humidity.
Ambient temperature:
10°C to 32.5°C (50°F to 90.5°F)
Ambient humidity:
20% to 80% (without condensation)
Do not block the air exit on top of the printer. Do not place objects on top of
the printer, especially on the air vent.
Ventilate the room in which you use the printer.
Do not place the printer where it is exposed to direct sunlight. Use a blind or
a heavy curtain to protect the printer from direct sunlight if the printer is
unavoidably set up near a window.
Do not install the printer near devices that contain magnets or generate
magnetic fields.
Do not subject the printer to strong physical shocks or vibrations. Do not
expose the printer to open flames or salty or corrosive gasses.
Place the printer on a flat, horizontal surface.
Keep the printer clean. Do not install the printer in a dusty place.
Do not install the printer near an air conditioner.
Do not place the printer where the air vent of the printer can be obstructed.
Keep a gap of approximately 100 mm (4 inches) between the air vent and
the wall.