Philips docking speaker with Bluetooth® DS3600 for iPod-iPhone-iPad - Manual (Page 6)

6 EN
Overview of the remote
control
a
• Select iPod/iPhone/iPad dock mode.
b /
• Skip to a track.
• Search within play.
c
• Mute volume.
d
• Start or pause play.
e /
• Adjust volume.
f
• Select MP3 link mode.
a
b
f
e
d
c
3 Get started
Always follow the instructions in this chapter in
sequence.
Prepare the remote control
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the exhausted battery:
1
Open the battery tray.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery tray.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
• Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
• Before connecting the AC adaptor, ensure you have
completed all other connections.
Note
• The type plate is located at the back of the main unit.
Connect the AC power adaptor to:
• the power supply socket on the back of
the docking speaker.
• the wall outlet.
CR2025