Brother HL 1650 - Manual (Page 42)

34
Printing a range of text blocks
The Block Printing function enables you to select the range of
text blocks to print.
1 Press g, then a.
2
Press l or r until the first number in the range
displayed below BLOCK NO. is flashing.
3
Press u or d until the desired block number is
displayed (or use the number keys to type in the desired setting).
4
Press r so that the second number in the range displayed below BLOCK NO.
is flashing.
5 Press u or d until the desired block number is displayed (or use the
number keys to type in the desired setting).
6
Press n (or p). START appears in the Print Option menu.
7 Press n (or p) to begin printing the specified number of labels. The
number of each copy is displayed while it is being printed.
Printing mirrored labels
This function prints your label so that the text can be read
from the adhesive side of the tape. If mirror-printed labels are
attached to glass or some other transparent material, they can
be read correctly from the opposite side.
1 Press g, then a.
2
Press l or r until MIRROR is displayed.
☞
To specify settings for additional Print Option functions, instead of continuing with
step 9 , press u or d until CONTINUE is displayed in the Print Option
menu, and then press n.
☞
If a bar code is selected as the numbering field in step 5 , skip steps 6 and 7 ,
and continue with step
8
.
☞
To specify settings for additional Print Option functions, instead of continuing with
step 7 , press u or d until CONTINUE is displayed in the Print Option
menu, and then press n.
LM NOP
QR
NOP
QR
ST
UVWX
ABC
ABC OFF
ON