Philips 27PT6341-07 - Manual (Page 19)

19
AUTO SOUND
1
Press AUTO SOUND button on the
remote control. The current Auto Sound
setting will be displayed in the middle of the TV
screen.
2
Press AUTO SOUND repeatedly to
toggle between the four settings. (Personal,
Voice, Music, or Theatre).
NOTE: The way you choose to set the Sound Menu
Controls will become your Personal setting.
T
he Auto Sound feature allows the listener to select between four different pre-set sound options.
T T
VOL
AUTO
SOUND
SOUND MENU CONTROLS
1
-
Press the MENU button on the remote control
to display the onscreen menu.
2
Press CURSOR < or > until the Sound
menu feature is highlighted.
3
Press CURSOR > or < to adjust
Treble - The control will enhance the
high frequency sounds.
Bass - The control will enhance the low
frequency sounds.
Balance - Level of sound coming from the left
and right speakers.
AVL (Auto Volume Leveler) (Auto Volume Leveler) - When On, AVL
will level out the sound being heard when sudden
changes in volume occur during commercial breaks
or channel changes.
INCR. SURROUND - Select Incr. Surround or
Stereo settings if you're in Stereo mode. Select
Mono or Spatial if you're in Mono mode.
SAP SS : AP AP Secondary Audio Programming is sent as a third
audio channel, a SAP signal can be heard apart from
the current TV program sound.
Sound - toggles between Stereo or Mono
settings.
Note: If Stereo is not present on a selected show
and the TV is in Stereo mode, the sound coming
from the TV will remain in the Mono mode.
T
o adjust your TV sound controls, select a channel and use the Sound Menu Controls listed below. Your selection is
T T
stored as
T T
Personal.
Stereo
or Incr. Surround
SAP
VOL
Stereo
or Mono
or On
>
- The control will enhance the - The control will enhance the
>
< >
MENU MENU