BenQ S660C - Manual (Page 78)

64 Using Your Phone
• Before entering any phone number, you can press (Select)
and then select a recipient from the list of contacts in the Phone
Book. Follow the steps below:
a. Press to scroll to the name of contact, and then
press (Select) to select that contact.
b. The display will show all the phone numbers stored
for the contact you selected. Press (Select) to
select the desired phone number.
8
If the number is too long, press to display the
complete number.
c. After the number has been selected, you must press
to return to the list of contacts in the Phone
Book. A check mark will appear beside the contact
whose number you selected as recipient for your
message. You can use the same steps to select the
numbers of other contacts.
d. After you have selected all the numbers you wish to
dial, press and the display will show all these
numbers.
4. After the numbers to be dialed have appeared on the screen,
press to use the following options with this message:
• Send Message: Sends the message to the numbers selected
previously.
8
When a message is to be sent, a copy of the message will be saved
to the Outbox folder. If the save fails, the "Save to Outbox Failed!"
screen will appear and the send operation will stop.
• Preview: Allows you to view the contents of the message.