Philips DC291-17 - Manual (Page 13)

13
1
Connect the AC power cord to the wall
outlet.
Set time and date
1
In standby mode, press and hold SET
TIME/PROG for 2 seconds.
Hour digits start to blink.
»
2
Press OK/ to select the 12/24 hour
format.
3
Press / to set the hour.
4
Press SET TIME/PROG to confirm.
The minute digits begin to blink.
»
5
Repeat steps 3-4 to set the minute, year,
month, and day.
Tip
In 12 hour format, [MONTH--DAY] is displayed. •
in 24 hour format, [DAY--MONTH] is displayed. •
MP3 LINK FM
ANTENNA
1
Open the battery compartment.
2
Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
Remove battery if it is exhausted or will not be •
used for a long time.
Batteries contain chemical substances, so they
•
should be disposed of properly.
Perchlorate Material-special handling may
•
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Risk of explosion! Keep batteries away from
•
heat, sunshine or fire. Never discard batteries
in fire.
Note
Before you press any function button on the •
remote control, first select the correct source
with the remote control.
If you are not going to use the remote control
•
for a long time, remove the batteries.
Connect power
Caution
Risk of product damage! Ensure that the power •
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
•
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
•
you have completed all other connections.
Note
The type plate is located on the bottom of the •
main unit.
English
EN