Brother HL-5150D - Manual (Page 109)

TROUBLESHOOTING 6 - 4
PRINT OVERRUN ■ Press the Go button to print the data left in the printer. Press the Job Cancel
button if you want to delete the data left in the printer.
■ If this does not clear the error, reduce the complexity of your document or
reduce the print resolution.
■ Expand the printer memory by adding a commercially available DIMM. See
Installing additional memory on page 4-2.
■ Set page protection to ON by using the supplied Windows ® driver or RPC
program.
■ Change the following settings in the supplied Windows ® driver and try again.
The best combination of these settings will vary depending on your document:
Graphics Mode
TrueType™ mode
Use Printer TrueType™ Fonts
RESOLUTION REDUCED
TO ENABLE PRINTING
(The printer has printed the
document at a reduced
resolution) ■ Reduce the complexity of your document before you print to prevent
automatic reduction in the resolution.
■ Expand the printer memory by adding a commercially available DIMM. See
Installing additional memory on page 4-2.
Error message Action