Philips 27PT9007D-17 - Manual

Better
Component Video
Input (CVI)
Provides superior picture
quality by separating the
green, blue and red
luminance signals. Typically
used with red/white audio
cables.
Basic
Composite Audio/
Video
Separate video (yellow) and
audio (red/white) cables that
provide a basic connection from
the set-top box and other devices.
Note: The color of audio inputs
may differ, e.g. Red/white or
red/back.
Provides a basic
connection
for antenna or cable.
Provides both audio
and video.
Basic
Use this guide to achieve the optimal connection for each of your components.
TV can support these different types of cable connection. Please check your
device to see which one applies.
Connecting Set-Top Box to TV
Cable Signal IN
from Cable Company
Back of Set-top Box
Good
S-Video
Supplies a better picture
than RF and composite
connections. Used with
red/white audio cables.
Note: The color of audio
inputs may differ, e.g.
Red/white or red/back.
75 Input
TV
Basic
Provides a basic
connection
for antenna or cable.
Provides both audio
and video.
Use second RF cable to
connect the set-top box
to the TV input (75 ).
Note: This connection
gives mono sound. For
stereo sound use also
composite audio/video
connection (refer to
panel 2).
Set the TV to the same
channel as the set-top
box output channel.
Change the channels at
the set-top box to view
the program.
Connect RF cable
from wall to input at
the back of the set-top
box.
Set the out channel of
the set-top box to CH 3
or 4 if available.
Press the Ana/Dig button
on the remote control to
set the TV to analog mode.