Philips 107S21-74 - Manual (Page 8)

Right-Click Features
On the LightFrame™ icon in the taskbar, click the right-side mouse button to bring up a menu from which you can
select:
About...which tells you something about LightFrame™
Help which takes you to the Help screen where you can find additional information
Exit which exits the LightFrame™ Program.
If you select exit and the color in the center of the icon is green, it will turn gray and LightFrame™ is deactivated. If you
select exit an Exit message appears asking you if are sure you want to exit. Select "Yes " to exit or "No " to abort the
exit. If you select Yes, you can always restart LightFrame™ by clicking on the desktop shortcut icon.
LightFrame™ is Suspended When . . .
Screensaver, Sleep mode, Deep Sleep (Power Off) mode is Activated
LightFrame™ goes into the Suspended mode as soon as a screensaver becomes active on your computer. This is
true even though the monitor icon may still have a green center. LightFrameä>> becomes active again as soon as the
screen is reawakened and the screensaver quits.
The same is true when the computer goes into Sleep mode or Deep Sleep (Power Off) mode.LightFrame™ goes into
Suspended mode and reawakens when the monitor is reawakened.
Screen or Area is Minimized
LightFrame™ suspends when a highlighted window is minimized. LightFrame™ reactivates when the highlighted
window is again maximized or restored to its previous size.
Another Window or Area Overlaps Highlighted Window or Area
LightFrame™ suspends if a window that is not highlighted overlaps a highlighted window. LightFrame™ reactivates
once the highlighted window is again on top.
Miscellaneous
Monitor Turned Off
If the monitor is "hard powered off " while a window or area is highlighted and then hard powered on again,
LightFrame™ is no longer active. The icon may still show the feature as still active. In this case, you have to exit
LightFrame™ and restart it via the icon on the desktop or the Start menu.
If the Monitor is Detached and Another Monitor is Attached
If the monitor is detached from the computer while a highlighted window or area is displayed and then another monitor
is attached, the system will have to be rebooted so that Philips ' LightFrame™ can detect the monitor 's LightFrame™
capabilities and store the setup information about the new monitor. If the monitor is not LightFrame™ capable, an Error
message appears. See Error Message 2 under the heading Error Messages. You can abort or continue the set up.
However, if you continue, LightFrame™ may not work with the monitor.
Error Messages
You may see this message when you install LightFrame™.
Error Message 1 dialog box here
LightFrame™ cannot detect a monitor which supports this feature. You can still proceed with the software installation
but LightFrame™ might not run on your system.
You may see this message when you try to switch monitors.
Error Message 2 dialog box here
LightFrame™ cannot detect a monitor which supports this feature. You can still start the software but LightFrame™
107S Product Information
file:///C|/rita wu/gs3LF/ENGLISH/107S/product/product.htm (4 of 7) [10/12/2000 1:45:12 AM]