Philips AZ2010-17 - Manual (Page 11)

RECORDING
11
1. Set the source selector to CD.
2. Insert a CD and if desired, programme track numbers.
3. Press STOP•OPEN 9 / to open the cassettte holder.
Insert a blank tape.
4. Close the cassette holder.
5. Press RECORD 0 to start recording.
– Playing of the CD programme starts automatically from the
beginning of the programme. It is not necessary to start the
CD player separately.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording press STOP•OPEN 9 /.
To select and record a particular passage within a track
1. During playback, press and hold down the SEARCH control
5 or 6 to find your passage.
2. Press PLAY•PAUSE 2; to put the CD player on pause at the
selected passage.
– Recording will begin from this exact point in the track when
you press RECORD 0.
1. Set the source selector to TUNER.
2. Tune to the desired radio station (see RADIO RECEPTION).
3. Press STOP•OPEN 9 / to open the cassettte holder .
Insert a blank tape.
4. Close the cassette holder.
5. Press RECORD 0 to start recording.
6. For brief interruptions, press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•OPEN 9 /.
RECORDING FROM THE RADIO
SYNCHRO START CD RECORDING
AZ 2010 /00
page
11
English
PROGR STOP
PLAY/
PAUSE
SEARCH
P
CD MODE
VOLUME
INCREDIBLE SURROUND
ULTRA BASS DYNAMIC BASS BOOST
SEARCH
ST OP-OPEN
PAUSE
RECORD PLAY
SEARCH
ST OP-OPEN
PAUSE
P
PLAY/
PAUSE
VOLUME
INCREDIBLE SURROUND
ULTRA BASS DYNAMIC BASS BOOST
SEARCH
ST OP-OPEN
PAUSE