Lamps and bulbs – BMW 325XI User Manual

Page 144

Advertising
background image

144

Parking lamps

5 watt bulb

Engine compartment, left side:

1. Turn the bulb holder to the left and

remove

2. Remove and replace the bulb.

Front turn signal indicators

21 watt bulb

1. Extend a screwdriver through the

upper opening and loosen the screw,
continuing until you can extract the
bulb by removing it from the front

2. Disconnect the plug
3. Apply gentle pressure and turn the

bulb toward the letters AUF – refer to
the marking on the housing– then
remove it for replacement

4. Connect the plug

5. Align the lamp assembly's two ridges

and the centering pin with the guides
on the vehicle when installing

6. Slide in the lamp, applying gentle

pressure to seat it firmly

7. Tighten the screw.

Lamps and bulbs

Online Edition for Part-No. 01 41 0 157 605 - © 09/03 BMW AG

Advertising
This manual is related to the following products: