Philips 19PS45S - Manual (Page 19)

19
H
OW TO
S
ET THE
TV
FOR
S
TEREO
P
ROGRAMS
Main
Picture
Sound
Features
Install Brightness
Color
Picture
Sharpness
Tint
More...
VOL
1
2
3
4
4
6
2
Main
Picture
Sound
Features
Install Treble Boost
Bass Boost
Balance
AVL
Sound
Sound
Treble Boost
Bass Boost
Balance
AVL
Sound
Sound
Treble Boost
Bass Boost
Balance
AVL
Sound
Mono
5
Sound
Treble Boost
Bass Boost
Balance
AVL
Sound
Stereo
On
Y our TV can detect a stereo signal
and will set itself automatically so
the stereo sound can be heard.
However, there may be occasions when
you might want to set the TV to mono.
The following steps describe how to
change the SOUND control:
Press the MENU button on the
remote to display the on-screen menu.
Press the CURSOR UP ▲ or CUR-
SOR DOWN ▼ button until the word
SOUND is highlighted.
Press the CURSOR RIGHT ᮣ
button to display the SOUND menu
features.
Press the CURSOR UP ▲ or
CURSOR DOWN ▼ button to scroll
the Sound menu features until the word
SOUND is highlighted.
Press the CURSOR RIGHT ᮣ
button to select MONO or STEREO.
When finished, press the STATUS
/EXIT button to remove the menu
from the TV’s screen.
With STEREO selected, the television
will reproduce any stereo broadcast sig-
nal it receives. Please note that you can
force a stereo broadcast signal to
MONO, but you cannot force a mono
broadcast signal to stereo.
Remember: If stereo is not
present on a selected show the
“Sound” control cannot be set to Stereo.
On the other hand, if stereo is present
on a selected show the “sound” control
can be set to Mono.
During channel changes the screen may
indicate Mono for a moment then
change to Stereo if a stereo signal is
detected.
S MART H ELP