Brother DCP-9055CDN - Manual (Page 116)

108
Machine Information
B
Checking the Serial Number
B
You can see the machine’s Serial Number on
the LCD.
a
Press Menu, 5, 2.
b
Press Stop/Exit.
Reset functions
B
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Note
Unplug the interface cable before you
choose Network or All Settings.
How to reset the machine
B
a
Press Menu, 1, 8.
b
Press a or b to choose the reset function
you want to use.
Press OK.
c
Do one of the following;
 To reset the settings, press 1 and go
to step d.
 To exit without making changes,
press 2 and go to step e.
d
You will be asked to reboot the machine.
Do one of the following;
 To reboot the machine press 1. The
machine will begin the reset.
 To exit without rebooting the
machine, press 2. Go to step e.
e
Press Stop/Exit.
Note
You can also reset the Network settings
by pressing Menu, 4, 0.