Philips HD8772-47 - Manual (Page 2)

Once machine turns on, it will indicate a priming cycle must be
started.
Place a container under steam wand. Press the “ ” button to
start the cycle. The machine will start the automatic priming
by dispensing some water through the steam wand. When
the machine stops dispensing, a warm up cycle will begin
automatically.
Once heated, a 1-minute rinse/self-cleaning cycle with fresh water will begin auto-
matically. Place a container under dispensing spout to catch water.
Before using the machine for the first time a manual rinse cycle must be
initialized. Place container under dispensing spout. Select the pre-ground coffee
brewing function by pressing the “ ” button. Check that the selection lever is set
to “ESPRESSO”. Press the “ ” button. Wait for dispensing to stop. When it has
stopped, repeat this operation 2 more times.
NOTE: Do not add pre ground coffee into the machine during this process.
Place a container under the steam wand and press the “ ” button.
Press the “ ” button to start dispensing hot water through the steam wand.
Do this until the "no water" icon appears in display.
Place a coffee mug under the dispensing spout and adjust it accordingly.
Push the lever to the up position to select the COFFEE
function.
Press the “ ” button to select your desired aroma or strength. Press the
“ ” button to start brewing.
Remove lower part of the dispensing spout and place a
travel mug underneath it.
Push lever to the up position to select the
COFFEE function.
Press the “ ” button to select your desired aroma or strength. Press the
“ ” button to start brewing.
Fill the water tank again up to the MAX level indicator.
Place a cup under dispensing spout and press the
“ ” button to grind and
dispense espresso.
Repeat Step 2 three-five times.
Your machine is now ready to brew coffee!
 3
 4
 5
 6
 1
 2
 4
 3
OPTiMiZE YOur cOFFEE
To optimize coffee extraction to compactness of the ground coffee, brew 3-5 cups of
espresso and discard BEFORE drinking.
 1
 2
 3
 1
 2
 2
 7
ESPRES SO
COFFEE
Place an espresso cup under dispensing spout and adjust it accordingly.
Push lever downwards to select ESPRESSO function.
Press the “ ” button to select your desired aroma or strength. Press
the “ ” button to start brewing.
 3
 1
 3
COFFEE
BrEWiNG a MEdiuM cOFFEE uSiNG WHOlE BEaNS
BrEWiNG a lONG cOFFEE uSiNG WHOlE BEaNS
BrEWiNG aN ESPrESSO uSiNG WHOlE BEaNS
 1
uSiNG THE auTOMaTic Milk FrOTHEr
 2
Insert suction tube into automatic milk frother. Push the
automatic milk frother onto the steam wand until it locks
into place.
Plunge suction tube into a milk container. Place a cup under
the automatic milk frother. Press the “ ” button then
press the “ ” button to start dispensing frothed milk.
Frothed milk will continue to dispense for 3 minutes or
until you press the “ ” button to stop dispensing.
After each use, clean milk frother as described in the user manual.  3