Philips HTS5580W-F7 - Manual (Page 24)

22
5
Press OK to confirm your choice.
Note
• If your preferred disc language is not available,
you can select [Other] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
• If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
Change advanced settings
1
Press (Home).
2
Select [Setup], then press OK.
3
Select [Advanced], then press OK.
4
Select and adjust the following settings:
• [BD-Live Security] : Restricts or allows
access to BD-Live.
• [Enhanced Audio] : Enables or disables
the audio post processing at the
speaker output.
• [Software Update] : Selects to update
software from the network or from
USB storage device.
• [Clear memory] : Clears local memory,
delete the BD-Live files that you
previously downloaded. If using an USB
storage device, the local storage folder
is ‘BUDA’.
• [DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
• [Version Info.] : Displays the software
version for the home theater.
• [Restore default settings] : Resets the
home theater to the default settings
programmed at the factory.
5
Press OK to confirm your choice.
Note
• You cannot restrict internet access on
commercial Blu-ray discs.
• Before you purchase DivX videos and play
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.
• You cannot reset parental control setting to its
default value.
Note
• The connected devices must be connected
through HDMI and switched on.
Change preference settings
1
Press (Home).
2
Select [Setup], then press OK.
3
Select [Preference], then press OK.
4
Select and adjust the following settings:
• [Menu language] : Selects the on-
screen display menu language.
• [Audio] : Selects audio language for video.
• [Subtitle] : Selects subtitle language for
video.
• [Disc Menu] : Selects menu language
for video disc.
• [Parental Control] : Restricts access to
discs that are recorded with ratings. To
play all discs irrespective of the rating,
select level ‘8’.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [Auto Subtitle Shift] : Enables or
disables shift subtitle. If enabled,
it adjusts the subtitle position
automatically to fit the TV screen.
• [Change Password] : Sets or changes
a PIN code to play a restricted disc.
Enter ‘0000’ if you do not have a PIN
or if you have forgotten your PIN.
• [Display Panel] : Changes the
brightness of the display panel.
• [Auto Standby] : Enables or disables
auto standby. If enabled, the home
theater switches to standby after 30
minutes of inactivity (for example, in
pause or stop mode).
• [VCD PBC] : Displays or skips the
content menu for VCD and SVCD
discs.
• [Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a specific time.
EN