Bissell 6405 EN - Manual (Page 11)

Replacing the HEPA filter cartridge
The HEPA filter cartridge should be
replaced every six months or if suction
is declining. More or less frequent
replacing may be required based on
individual vacuuming habits and types of
debris picked up.
Note: To have the benefits of the
Airetight ™ HEPA System, you must
use the BISSELL HEPA filter cartridge.
1. To remove the HEPA filter cartridge,
push down on the filter door latch and
pull door away from the cleaner.
2. Lift the tab at the top of the HEPA filter
cartridge and pull cartridge away from
the cleaner.
3. Replace the used HEPA filter cartridge
with a new one.
Note: To avoid damaging the HEPA
filter cartridge and reducing its
filtration capabilities, be careful not
to touch the filter material. The HEPA
filter cartridge is not washable.
4. To ensure a tight seal, the filter cartridge
must latch fully in place. To install, push
firmly near the top with the palm of your
hand while holding the vacuum with
your other hand.
11
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
M
aintenance and care
1
2
4
ug203-1369_5770_507.indd 11 ug203-1369_5770_507.indd 11 5/31/07 1:16:05 PM 5/31/07 1:16:05 PM