English française español, Video camera/games console to tv, Side connections - usb/headphone – Philips 50PFP5332D-37B User Manual

Page 31: Digital surround receiver, Viewing content from a usb device

Advertising
background image

23

4

Video Camera/Games Console to TV

C

USB

Source Button

Using Composite Audio/Video Input

Connect the video cable (yellow) from the video output on camera (or

other device) to the video input (yellow) located on the side of TV.

OR

Connect S-video cable to S-video input on side of TV and to the output.

Connect audio cables (red/white) from audio outputs on device to audio

inputs (red/white) on the side of the TV.

Tip: For mono devices, connect only white audio cable from device's audio

output to white audio input on the side of TV.

Turn on the TV and the device. Press the SOURCE button on the

remote control until SIDE appears on TV screen.

Press PLAY on the device to verify connection.

Note: Interference will occur when S-video and Composite audio/video are

connected.

Headphone

&

Insert the plug into the headphone socket L as shown.

é

Press the

MUTE

button on the remote control to switch off the internal

loudspeakers of the TV.

The headphone impedance must be between 8 and 4000 Ohm. The

headphone socket has a 3.5 mm jack.

In the Sound menu select

Headphone volume

to adjust the headphone

volume.

Side connections - USB/Headphone

Viewing content from a USB device

Inserting a USB device
Note: USB devices are not supplied with this TV.
Insert a USB device in the

USB

connector at the side of the TV.

When a USB device is inserted, the Multimedia browser menu is displayed

automatically, see further.

Removing the USB device

&

First switch off the menu. To do so, navigate to the Multimedia browser

menu and press the

MENU button to exit the menu.

é

Remove the USB device.

entry 2005 side+usb.eps

USB

The TV can output Digital audio via the

AUDIO OUT (DIGITAL)

connector to an external amplifier or receiver.

If your amplifier or receiver has a matching connector for Digital Audio In,

you can connect it with a single cable to the TV’s

AUDIO OUT (DIGITAL)

.

See Connect Accessory Devices, p. 22.

Connect a Digital MultiChannel Surround receiver to the

AUDIO OUT

(DIGITAL)

connector at the bottom of the TV.

Digital Surround receiver

file : conn us entry05 dig su

rr.eps

AUDIO OUT

(DIGITAL)

AUDIO OUT

(DIGITAL)

CABLE / ANTENNA

Back of TV

HDMI 1

HDMI 2

English

Française

Español

Advertising
This manual is related to the following products: