Helpful hints – Philips VRX462AT User Manual
Page 40
VCR PLUS+ PROG.
1 ONCE
2 DAILY
3 WEEKLY
TO SELECT PUSH NO. SHOWN
TO END PUSH EXIT
4
Select a ONCE, DAILY, or WEEKLY recording.
To record the program one time, press the Number 1 button to
select ONCE. To record the same program every day from
Monday through Friday, press the Number 2 button to select
DAILY. To record the same program every week on the same day
(such as every Saturday), press the Number 3 button to select
WEEKLY.
40 Timer Recording With the VCR Plus+ Programming System
• If you enter an incorrect PlusCode
programming number at step 3,
ERROR will appear briefly, then the
previous menu will appear. Enter
the correct PlusCode programming
number.
• If ERROR appears at step 4 when
you select DAILY, the PlusCode pro-
gramming number you entered is
for a program that is broadcast on
Saturday or Sunday. The program
cannot be recorded repeatedly from
Monday through Friday.
Helpful Hints
VCR PLUS+ PROG.
VCR PLUS +
TO END PUSH EXIT
Follow the steps below to program a timer recording using
PlusCode programming numbers. Before you begin make sure:
•
Channels are programmed. Details are on page 12.
•
The clock is set. Details are on pages 14 - 17.
•
There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
•
The VCR is in VCR position (the VCR light will appear on the
display panel of the VCR). If the VCR light does not appear,
press the VCR/TV button once.
Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step 1.
1
Press the VCR button.
2
Press the VCR PLUS+/ENTER button. The on-screen display
shown below will appear.
3
Use the Number buttons to enter the PlusCode program-
ming number of the program you wish to record. (This
number is different for every program, and it can be four to eight
digits long.) Finally, press the VCR PLUS+/ENTER button.
VCR PLUS+ PROG.
VCR PLUS+ 13285
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
...
...
POWER
CBL/DSS
VCR
TV
EJECT
MUTE
MENU
EXIT/STATUS
CLEAR
VCR PLUS+
/ENTER
LIGHT
F.ADV
PAUSE/STILL
1
2
3
4
5
6
7
8
9
100
0
GO-TO
MEMORY
INDEX
VAR. SLOW
REMOTE LOCATOR
SKIP
VCR/TV
SPEED
SEARCH
SLOW
TRACKING
STOP
REW
FF
PLAY
VOL
CHANNEL
/OTR
REC
1
2
4
3