Philips HSB2313A-F7 - Manual (Page 13)

11
Connect coax supported devices
The home theater system can decode digital
audio signals. You can connect the system to
your digital amplifi er or receiver.
1
Connect the supplied coaxial cable to the
COAXIAL jack on the main unit and the
COAXIAL/DIGITAL output jack on the
connected device.
You can connect an optical cable (not •
supplied) to the OPTICAL jack on the
main unit and the COAXIAL/DIGITAL
output jack on the connected device.
Tip
You can connect all the devices to the home •
theater system at the same time.
OPTICAL
HDMI OUT HDMI IN 1 HDMI IN 2
DIGITAL OUT
Amplifier
Connect HDMI supported devices
HDMI (High Defi nition Muiltimedia Interface) is
a digital interface that supports both audio and
video transmission through a single cable. If you
connect your HDMI-compliant DVD players and
TV to the home theater system, you can watch
DVDs or Blu-ray discs that contain HD (High-
Defi nition) content. This connection provides
the best picture quality.
Note
Some TVs do not support HDMI audio •
transmission.
1
Connect an HDMI cable (not supplied) to
the HDMI OUT jack on the DVD player
and HDMI IN 1 or HDMI IN 2 jack on the
main unit.
2
Connect another HDMI cable (not
supplied) to the HDMI OUT jack on the
main unit and the HDMI IN jack on the TV.
If your TV has only a DVI (Digital Visual •
Interface) connection, connect through
a HDMI/DVI adaptor. An extra audio
connection is needed to complete this
connection.
3
Press HDMI to select HDMI 1 or HDMI 2 .
OPTICAL
HDMI OUT HDMI IN 1 HDMI IN 2
HDMI OUT HDMI IN 2
TV
English
EN