Philips 8160XLCC-40 - Manual (Page 18)

ENGLISH 18
C
3 Clean inside razor heads and hair chamber
by running under hot water.
C
4 Clean outside of Razor Head Assembly by
running under hot water.
5 Close the Razor Head Assembly and shake
off excess water.
C
6 Open Razor Head assembly again and leave
open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue.This could damage the
shaving heads.
C
7 If the shaving unit becomes detached from
the razor, you can easily reattach it.
8 You may also clean the hair chamber
without water by using the supplied brush.
8160XLCDFU021_16_05Norelco.qxd 3/4/05 3:49 PM Page 18 (Zwart plate)