Philips 32PFL3505D-F7 - Manual (Page 22)

21
English
Energy saving mode
You can set whether the power consumption is saved or not.
1
Press MENU on the remote control and select [Features] >
[Energy Saving Mode].
Child Lock
EasyLink
Location
Current Software Info
Off
Home
Closed Caption
Sound
Setup
Language
Features Energy Saving Mode
Picture
2
Press Î or ï to select the desired mode, then press OK.
On Select if you want to reduce power consumption.
Off
Power consumption may possibly exceed the limited
requirement of ENERGY STAR ® qualification.
3
Press MENU to exit.
Set your location to home
You can set the location of your TV to [Home] or [Retail].
Choosing [Home] gives you full fl exibility to change predefi ned settings for
picture and sound.
1
Press MENU on the remote control and select [Features] >
[Location].
2
Select [Home] and press OK to confi rm your choice.
3
Press MENU to exit.
Note
• You must set [Home]. Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to stand-by mode.
EasyLink
This function allows you to operate the linked functions between our
brand devices with EasyLink capabilities and this unit connected via a
HDMI cable.
1
Press MENU on the remote control and select [Features] >
[EasyLink].
Auto Device Off
Auto TV On On
On
On
Device List
Master EasyLink
Sound
Setup
Language
Features
Picture
2
Press Î or ï to highlight the desired setting and press OK to
select the setting.
3
Adjust the following items.
[Master EasyLink]
Set the EasyLink [On] or [Off].
The following additional settings will be grayed out when you set
to [Off].
Press
Î or ï to select the desired option, then press OK.
On
Select if you have connected an external device that
is compatible with the EasyLink function.
Off Disable all EasyLink function.
[Auto Device Off]
Press
Î or ï to select the desired option, then press OK.
On
Your connected EasyLink device goes into stand-by mode
automatically when you put this unit into stand-by mode.
Off
Your connected EasyLink device stays on even if unit
goes into stand-by mode.
[Auto TV On]
Press
Î or ï to select the desired option, then press OK.
On
This unit turns on automatically when you turn on your
connected EasyLink device.
Off
This unit remains in stand-by mode even if you turn on
your connected EasyLink device.
[Device List]
This function lets you see the product name of connected devices.
Press
Î or ï to select the desired HDMI device listed on the TV
screen, then press OK.
4
Press MENU to exit.
EN