Philips 740909008 - Manual (Page 22)

22
SAFETY RULES - INSTALLATION
Key to machine components
Coffee bean container
Coffee bean container lid
Grinder adjustment knob
Dose adjustment knob
Ground coffee dispenser lid
Cup plate
Power switch (ON/OFF)
Water container lid
Water container
Dregs box
Power cable
Water tray + grill
Water tray level float
Height-adjustable coffee dispenser
Steam/hot water tube
Front door
Steam knob
Coffee dispenser unit
Coffee dispenser unit wrench
Cleaning brush
Ground coffee measuring spoon
Control panel
Knob for regulating the quantity of coffee
dispensed in one cup
Coffee dispensing button
Coffee temperature / function ready light
Ground coffee selector button
Ground coffee light
Hot water button
Hot water LED
Machine ON light
Warning light
4 INSTALLATION
For your own safety and the safety of others,
you must strictly comply with the “Safety Rules”
described in chap.3.
4.1 Package
The original packaging was designed and made to
protect the machine during shipping.
We recommend keeping it for future transport pur-
poses.
4.2 Preliminary operations
• Remove the water tray (12) with grating from the
packaging materials.
• Take the coffee machine out of its packing
and position it in a suitable place that meets
the requirements described in the safety rules
(chap.3.).
• Insert the water tray (12) into the slot provided on
the machine; make sure that the tray, the dregs
box (10) and the coffee dispensing unit (18) are cor-
rectly fitted and that the front door (16) is closed.
• Fit the coffee bean container lid (2) onto the coffee
bean container (1).
Store the cleaning brush (20), the coffee dispensing
unit wrench (19) and ground coffee measuring
spoon (21) in a safe and convenient place.
• Before plugging in the machine, make sure the
power switch (7) is set to -0-.
If the red light (30) flashes when you turn on the
machine, it means that one of the above-described
parts has not been correctly fitted in place.
Important note: It is important to read the
contents of Chapter 14, which explains in
detail the meaning of all machine signals provided
to the user by the lights on the control panel.
4.3 Turning on for the first time
• Lift out the water container (9) and remove the
lid (8). Rinse it out and fill it with fresh drinking water,
making sure you do overfill it. Lower the container
back into place inside the machine and replace the
lid (8).
Fill the container (9) only with cool, still
water. Hot water or other liquids may
damage the container and/or the machine. Always
make sure there is enough water inside the
container before starting the machine.
• Take off the lid (2) and fill the container with
coffee beans (1).
Fit the lid of the coffee container (1) back
into place. Ground or freeze-dried coffee or