Philips Straightener HP8339-00 ProCare - Manual (Page 7)

» Tip: To avoid unintentional switching of buttons during
process, you can also activate the key-lock function manually
by sliding and holding the key-lock button ( ).
» Note: The appliance is equipped with an auto-shut off
function. After 60 minutes, the appliance switches off
automatically. You can re-start the appliance by pressing and
holding the button until the LCD screen lights up.
4 Slide the straightening plates lock ( ) to to unlock the plate
arms.
5 Comb your hair and take a section that is not wider than 5cm
for straightening.
6 Place it between the straightening plates ( ) and press the plate
arms together.
7 Slide the straightener down the length of the hair in a single
motion (max. 5 seconds) from root to end, without stopping to
prevent overheating.
‡ 7R FUHDWH ÁLFNV WXUQ WKH VWUDLJKWHQHU KDOIFLUFOH LQZDUGV
(or outwards) when it reaches the hair ends. Hold the
straightener in that position for 2 to 3 seconds, and then
release it.
8 After 20 seconds, repeat step 6 and 7 until you achieve the
desired look.
9 To straighten the rest of your hair, repeat steps 5 to 7.
10 To re-style your hair, press and hold style refresh button ( )
for 3 seconds to switch on the touch-up function. This function
ensures the right result with a reduced temperature and better
protection.
» When the function is on, the indication “STYLE REFRESH”
( ) is displayed and the temperature indication disappears.
11 Press the style refresh button again, and the previous
straightening temperature setting appears.