Philips 6900LC-41 - Manual (Page 8)

14
ENGLISH ENGLISH
15
C
14 Turn the wheel clockwise until it locks into
place.
C
15 Replace the Razor Head Assembly back on
razor.
16 Put the Protective Cap on the razor to
protect heads.
This razor has no other user-serviceable parts.
For assistance call 1-800-243-3050.
Replacing the Razor Heads
◗ Replace the razor heads once a year for
optimal shaving results.
◗ Replace damaged or worn razor heads with
model HQ56 Philips Norelco razor heads
only.
Storage
◗ Be sure razor is turned off. Remove cord
from outlet and razor before storing in a safe,
dry location where it will not be crushed,
banged, or subject to damage.
◗ Do not wrap power cord around razor when
storing.
◗ Store power cord in a safe location where it
will not be cut or damaged.
15
C
7 Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
8 Separate the cutter from the comb.
C
9 Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
C
10 Brush the slots of the comb.
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Shaving Head Cleaning Spray,
model HQ110 or alcohol). This helps prevent wear
of the shaving heads.
C
11 Replace the cutter and comb into the
Razor Head Assembly.
12 Repeat the process for the other two sets
of cutters and combs.
13 Replace the frame.
1
2