Philips AZ1155 - Manual (Page 17)

English
17
AZ 1150 /17
page
17
1 During playback, select your play mode by
pressing CD MODE once or more until
the desired play mode is shown.
• The SHUFFLE/ REPEAT play options
can be combined and used with a program:
e.g. SHUFFLE REPEAT ALL - repeats
the entire program in random order.
2 To return to normal playback press CD
MODE until the various SHUFFLE/
REPEATmodes are no longer shown.
• You can also press
9 to quit the play
mode.
Programming track numbers
You may store up to 30 tracks in the
desired sequence. If you like, store any
track more than once.
1 In the stop position, first select your album
and tracks as follows:
MP3-CD only:
• press ALBUM, PRESET + or - once or
more to find your album.
• Turn the ROTARY NAVIGATION anti-
clockwise or clockwise (or ¡ or ™ buttons
on the remote, AZ1155 only) to select a
particular track.
➜ Display: album/ title flashes if you have
not made the respective selection.
• Continue with the following, steps 2-4.
CD:
• First use the ROTARY NAVIGATION
(or ¡ or ™ buttons on the remote,
AZ1155 only) to select a particular track.
2 When your chosen track number appears,
press PROGRAM once to store the
track.
➜ Display shows program and 'Prog'
briefly followed by your selected track
number.
➜ If you attempt to program without first
selecting a track number, no SEL is
shown.
3 Repeat steps 1 and 2 to select and store
all desired tracks in this way.
➜ FULL is displayed if you attempt to
program more than 30 tracks.
4 To play your program, press
2;.
To review a program
• In the stop position, press and hold down
PROGRAM for more than 2 seconds.
➜ Display shows all your stored track
numbers in sequence, or the MP3-CD
title and album numbers.
Erasing a program
You can erase the contents of the memory
by:
– opening the CD door;
– selecting TUNER source;
– pressing
9 twice during playback/ in the
stop position
➜ Display: shows 'no Pr' briefly when
the program is cancelled.
MP3-CD/CD Playback
AZ1150/17 eng 30/5/01 14:53 Page 17