Hale RGA - Manual (Page 8)

SPLIT-SHAFT PTO GEARBOX
INSTALLATION MANUAL 6
SPECIFICATIONS:
Final Drive Ratios Available:
Weight:
Dimensions:
Overall Height:
Overall Width:
Face-to-face Length Between
Input Flanges:
Bottom of Gearbox to Center of
Input Flange:
Center of Input Flange to
Center of Output Shaft:
Maximum Input Speed
(RPM):
Maximum Auxiliary Drive
Shaft Torque:
Maximum Input Torque:
Auxiliary Drive Shaft:
Oil Capacity:
Oil Type: SAE EP 90 (or 80W-90)
1.58:1, 1.71:1, 1.86:1, 2.05:1,
2.28:1
325 lbs (147 kg)
25- 9 /
16
inches (649 mm)
16 inches (406 mm)
14- 7 /
16
inches (367 mm)
7 inches (178 mm)
RGA-23: 13- 3 /
8
inches (340 mm)
RGA-21: 13- 9 /
16
inches (344 mm)
RGA-19: 13-¾ inches (349 mm)
RGA-17: 13-
15 /
16
inches (354 mm)
RGA-15: 14- 1 /
8
inches (359 mm)
RGA-23: 2630
RGA-21: 2920
RGA-19: 3220
RGA-17: 3500
RGA-15: 3800
2300 lb-ft (3118 N-m)
16,000 lb-ft (21,693 N-m)
2 inch x 10 spline
8 pints (3.8 Liters)
3.00:1, 2.67:1, 2.18:1, 1.92:1,
1.71:1, 1.27:1, 1.00:1
200 lbs (91 kg)
19 inches (483 mm)
11-½ inches (292 mm)
13 inches (330 mm) with optional
oil cooler
14- 7 /
16
inches (367 mm)
MGA-30, MGA-26, MGA-21,
MGA-19, MGA-17: 6-¾ inches
(171 mm)
MGA-12, MGA-10: 7 inches
(178 mm)
MGA-30, MGA-26, MGA-21,
MGA-19, MGA-17: 9-½ inches
(241 mm)
MGA-12, MGA-10: 9-¼ inches
(235 mm)
MGA-30: 2090
MGA-26: 2350
MGA-21: 2880
MGA-19: 3270
MGA-17: 3670
MGA-12: 4940
MGA-10: 6270
1200 lb-ft (1627 N-m)
16,000 lb-ft (21,693 N-m)
1-½ inch x 10 spline
1-
3 /
8
inch x 10 spline
Vertical: 5-½ pints (2.6 Liters)
[MGA-12, MGA-10: 7 pints (3.3
Liters)]
Horizontal: 6 pints (2.8 Liters)
MGA RGA
Drive Flanges: One piece shaft/flange design. Flanges are piloted and predrilled for compatibility with
1600, 1700 and 1800 series Spicer Flanges. Drive shaft is 2-¾ inches (70 mm) in diameter.
Controls:
Shift: Manual (standard), Air Power (optional), Vacuum Power (optional)
Warning Lights:
In cab: Two GREEN; “OK TO OPERATE”, “PUMP ENGAGED”
Operator Panel: GREEN; “WARNING: DO NOT OPEN THROTTLE UNLESS LIGHT IS ON”