Hale AutoFill-E Tank Refill Control System - Manual (Page 48)

Intelli-Tank Manual (106759) 12-15-03 – 2 – Class 1
The Intelli-Tank Driver module utilizes the 1-wire data line to receive tank level
information from a Master 4 light tank level display (C1-PN 106299 or 106296)
and then mimics the Master’s display with its high current outputs. The module
also incorporates an auto-refill function that, when activated, turns on the fill
output at less than ¾ tank level and turns it off when the tank reaches the FULL
point. An alarm output activates when tank level reaches ¼ or if data from the
Master is lost for over 10 seconds.
Basic parts:
Driver module C1 – PN 106877 12/24V
Installation Harness C1 – PN 106692
User Manual C1 – PN 106759
Prerequisite parts:
Master 4 light tank
level display C1 – PN 106299 12V
106292 24V
Accessories:
Remote dash indicator C! – PN 106878
Modes of Operation:
Normal
The module receives tank level data from the Master and mimics
the Master’s display with the high current outputs.
Auto-Fill
When the level of the tank is below ¾ the fill output comes on and
remains on until the Master display indicates FULL.