Off Road Unlimited 79002 Defender Series 99-Current Ford Super Duty and Excursion Front Bumper Guard - Manual (Page 3)

ORU - Ford Super Duty & Excursion Front Bumper Guard
offroadunlimited.com
page 2
photo 1 photo 2
1) Remove front 4 bolts that attach factory bumper. Retain bolts and captive nut assemblies (see photo #1).
2) Have an assistant hold the bumper guard in place and attach using the factory bolts and captive nuts
(See photo #2). Do not fully tighten at this time.
3) Adjust bumper and guard positions and tighten bolts to factory specifications.
4) Install plastic end caps.