Steele Products SP-CE358TM - Manual (Page 28)

28
Owner’s Manual
Compressor (cont’d)
TROUBLE SHOOTING (cont’d)
Motor will not run (cont’d)
• Check valve stuck open
Remove and clean or replace.
• Pressure bleeder valve on pressure switch has not unloaded head pressure
Bleed line by moving pressure switch lever to OFF position before restarting.
If bleeder valve does not open, replace bleeder valve.
• Wrong wire gauge in extension cord
Check for proper gauge and extension cord length.
• Paint spray on internal motor parts
Bring to service center for service. Do not operate compressor in the paint spray area.
• Possible defective motor
Bring to service center for inspection and repair.
• The compressor motor shuts OFF.
The thermal protector was tripped after the compressor cools down it will automatically
restart.