Steele Products SP-PB140 - Manual (Page 4)

Accessories
The STEELE ® Band Saw is supplied with the
following accessories as standard
• 59 -1/2” band saw blade (fiited)
• Rip Fence
• Miter Gauge
• Light Bulb
• Wrench
• Hex Keys (x2)
• Instruction Manual
• Receipt Holder
Unpacking
Due to modern mass production techniques, it is
unlikely that your STEELE® Power Tool is faulty or
that a part is missing. If you find anything wrong,
do not operate the tool until the parts have been
replaced or the fault has been rectified. Failure to do
so could result in serious personal injury.
Assembly Time
Assembly consists of attaching the table, table
insert, rip fence and miter gauge. Assembly will
take approximately 10-15 minutes.
RequiredTools
The following tools are required:
• 0.16”(4mm)Hex Key(supplied)
• 0.12”(3mm)Hex Key(supplied)
• Wrench (supplied)
7
Know your product
1. On/Off switch
2. Laser light on/off switch
3. Light on/off switch
4. Laser adjustment knob
5. Laser aperture
6. Work table trunnion
7. Work table
8. Table insert
9. Table tilt adjustable screw stop
10.Upper housing locking screw
11.Upper housing door
12.Lower housing locking screw
13.Lower housing door
14.Saw blade
15.Blade tension knob
16.Rip fence
17.Rip fence locking handle
18.Miter gauge
19.Miter gauge locking knob
20.Upper blade guide
21.Blade guide adjustment knob
22.Blade guide locking knob
23.Blade tracking adjustment knob
24.Blade tracking locking nut
25.Table locking knob
26.Table setting lever
27.Bevel adjustment scale
28.Dust extraction port
29.Adjustable worklight
5
7
6
4
1
3
2
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
8