Steele Products SP-PB125 - Manual (Page 2)

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
17
General safety rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specific safety rules for the cut-off saw . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Electrical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Know your cut-off saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Assembly and adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Replacement parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Contents
2
General safety rules
Safety is a combination of common sense, staying alert, and knowing how your cut-off saw works.
01.READ and become familiar with this entire instruction manual. Learn the tool’s applications,
limitations,and possible hazards.
02.AVOID DANGEROUS CONDITIONS. DO NOT use power tools in wet or damp areas or expose them
to rain. Keep work area well-lit.
03.DO NOT use power tools in the presence of flammable liquids or gases.
04.ALWAYS keep your work area clean, uncluttered, and well-lit. DO NOT work on floor surfaces that
are slippery from sawdust or wax.
05.KEEP BYSTANDERS AT A SAFE DISTANCE FROM the work area, especially when tool is operating.
NEVER allow children or pets near the tool.
06.DO NOT FORCE THE TOOL to do a job for which it was not designed to perform.
07.DRESS FOR SAFETY. DO NOT wear loose clothing, gloves, neckties, or jewellery (rings, watches,
etc.) when operating tool. Inappropriate clothing and items can get caught in moving parts and
draw you in. ALWAYS wearnon-slip footwear and tie back long hair.
08.WEAR AFACE MASK OR DUSTMASK as the sawing operation produces dust.
09.ALWAYS remove the power cord plug from the electrical outlet when making adjustments,
changing parts, cleaning or working on the tool.
10.KEEP GUARDS IN PLACE AND IN WORKING ORDER.
11.AVOID ACCIDENTAL START-UPS. Make sure that the power switch is in the OFF position before
plugging in the power cord.
12.REMOVE ADJUSTMENT TOOLS. ALWAYS MAKE SURE all adjustment tools are removed from
the cut-off saw before turning it on.
13.NEVER LEAVE ARUNNING TOOL UNATTENDED. Turn the power switch to OFF.DO NOT leave
tool until it has come to a complete stop.
14.NEVER STAND ON THE TOOL. Serious injury could result if the tool tips or is accidentally hit.
DO NOT store anything above or near the tool.
15.DO NOT OVERREACH. Keep proper footing and balance at all times. Wear oil-resistant,rubber-
soled footwear. Ensure the floor is not subjected to accumulation of oil, scrap, and other debris.
16.MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order.Follow
instructions for lubricating and changing accessories.
WARNING: TO AVOID MISTAKES THAT COULD CAUSE SERIOUS INJURY, DO NOT PLUG IN THE
CUT-OFF SAW UNTIL THE FOLLOWING STEPS HAVE BEEN READ AND UNDERSTOOD.
3