Steele Products SP-PM207SDC - Manual (Page 14)

ADJUST THE CUTTING HEIGHT ( see Fig.10)
1. Simply depress the lever (1) towards the wheel and move to desired position. This sets all wheels
to the same position.
2. To raise the height, pull the height adjustment lever from the current stop position towards the back
of the mower.
3. To lower the height, pull the height adjustment lever from the current stop position towards the front
of the mower.
7-Position Height Adjustment
OPERATING YOUR MOWER
13
1
HIGH
LOW
Fig.10
1. 1-3/4 in.
2. 2 in.
3. 2-1/4 in.
4. 2-1/2 in. 5. 2-3/4 in.
6. 3 in.
7. 3-1/4 in.