AKiTiO NT2 LAN - Manual (Page 6)

NT2 LAN Getting Started
Page 3
1.4.2 Rear
Button/Icon Status/Function
Slot for security lock (e.g. Kensington security lock)
Reset
• When the power is turned off, press and hold this button, turn on the
power and let go of the button when you see the LED at HDD 1 light up
red (~ 2 seconds) in order to enter the flash mode.
• When the network drive is up and running, press and hold this button for
about 1 second in order to reset the administrator login to factory default.
USB 1.1 host port for USB printers
• Yellow = Indicates data access (read/write)
• Green = Indicates LINK status of network connection
Power receptacle