Essential circuits – Briggs & Stratton 01815-0 EU User Manual

Page 7

Advertising
background image

7

Briggs & Stratton Power Products Home Generator

Owners Manual

• Install the generator as close as possible to the Transfer

Switch to reduce the length of wiring and conduit.

• Install the generator as close as possible to the fuel

supply to reduce length of pipes.

IMPORTANT: Laws or local codes may regulate the
distance to the fuel supply.

The Home Standby Generator is shipped already attached
to its mounting pad. Unless mandated by local code, a
concrete slab is not required.

If mandated by local code, construct a concrete slab at least
3 inches thick and 6 inches longer and wider than the unit.
Attach unit to slab with 1/4” diameter (minimum) masonry
anchor bolts long enough to retain the unit.

Essential Circuits

As a Home Standby Generator owner, it is important that
you clearly identify the circuits in your building that are
"essential" to you.

It is important that your installer understand which circuits
you want to include as "Essential Circuits". Depending on
the power consumed by these circuits, most or all of them
can be switched to the Home Standby Generator for the
duration of normal power interruption.

The wattage reference guide shown in Figure 2 will assist
you with your decision-making process. It provides the
wattage used by many ordinary household devices. Use it as
a guide when selecting your essential circuits. Review this
information with your installer and ask about any technical
considerations that might affect the cost of your installation.

Figure 1 — Home Standby Generator Clearances

Exhaust port must be

5 ft (152 cm) minimum

distance from building

openings

Exhaust

Port

Device

Running

Watts

Air Conditioner (12,000 Btu)*

1700

Air Conditioner (24,000 Btu)*

3800

Air Conditioner (40,000 Btu)*

6000

Battery Charger (20 Amp)

500

Circular Saw (6-1/2")

800 to 1000

Clothes Dryer (Electric)*

5750

Clothes Dryer (Gas)*

700

Clothes Washer*

1150

Coffee Maker

1750

Compressor (1 HP)*

2000

Compressor (1/2 HP)*

1400

Compressor (3/4 HP)*

1800

Curling Iron

700

Dehumidifier*

650

Electric Blanket

400

Electric Range (per element)

1500

Electric Skillet

1250

Freezer*

700

Furnace Fan (3/5 HP)*

875

Garage Door Opener*

500 to 750

Hair Dryer

1200

Hand Drill

250 to 1100

Iron

1200

Jet Pump*

800

Light Bulb

100

Microwave Oven

700 to 1000

Milk Cooler*

1100

Oil Burner on Furnace

300

Oil Fired Space Heater (140,000 Btu)

400

Oil Fired Space Heater (30,000 Btu)

150

Oil Fired Space Heater (85,000 Btu)

225

Radio

50 to 200

Refrigerator

700

Slow Cooker

200

Submersible Pump (1 HP)*

2000

Submersible Pump (1/2 HP)*

1500

Submersible Pump (1-1/2 HP)*

2800

Sump Pump*

800 to 1050

Table Saw (10")*

1750 to 2000

Television

200 to 500

Toaster

1000 to 1650

Figure 2 — Wattage Reference Guide

*Allow three (3) times listed watts for starting device

Advertising
This manual is related to the following products: