BNC 1420 - Video Microscope - Manual (Page 17)

15
Objective and seat for fluorescence filter
2.6 Fluorescence filter
The fluorescence filter is located in the objective mounting ring right
behind the microscope objective and can be replaced by unscrewing the
objective. The filter size is half inch (12.7 mm) diameter, and the filter fits
into a recess in the microscope mounting ring.
2.7 Illuminator module
The illuminator module consists of four independent banks of LEDs:
»
Two banks of each 8 diodes (A and B)
» Two banks of each 4 diodes (C and D)
The following standard illuminator modules are standard:
LED-B: 3 blue (A, B, and D) and one white channel (C)
LED-G: 3 green and one white channel
LED-R: 3 red and one white channel
LED-W: 4 white channels
LED-RGBW: 1 red, 1 green, 1 blue, and one white channel.
The illuminator module can be removed from the traverse from the top by
pulling the module upwards.