Poison Spyder JK ROCKER KNOCKERS - Manual (Page 6)

INSTALLATION INSTRUC
TIO
NS
Poison Spyder Customs • JK ROCKER KNOCKERS INSTALLATION Page 6
©2009 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
careful not to strip the threads on the nut
clips! It is sometimes necessary to “jiggle”
the bolt and/or nut clip a little bit to properly
align the threads. Only finger-tighten these
screws at this time.
16. Use the 1/2” box end wrench to tighten the
six (6) 5/16-18 lock nuts on the mounting
studs that protrude through the pinch weld
flange.
FIGURE 17
17. Use the 7/32” hex key to tighten the eight
(8) 3/8-16X1 SS button head socket cap
screws on the Rocker Knocker mounting
flange along the underside of the Jeep.
FIGURE 18
18. Repeat the procedure for the passenger
side.