PureFlow AirDog DF-165 - 6.4L Ford 2008-2010 - Manual (Page 6)

6
AirDog
®
II Ford PowerStroke 2008 - 2010 6.4L
Section 2 Installation & Safety Guidelines
AirDog
®
II
MODEL DF-100 & DF-165
The installation of your AirDog
®
II can be made relatively easy by following the steps outlined
in this manual, and:
1. Inventory the package components completely. Notify PureFlow AirDog immediately of
any parts missing or damaged.
2. Read the installation manual completely. Understand how the system operates and
installation recommendations before beginning installation.
3. The installation recommendations contained herein are suggested installation guidelines
only. Individual installations may vary.
4. When installing the AirDog®II fuel lines, be sure connect the ORIGINAL ENGINE
RETURN LINE as it was from the factory when the installation is complete!
5. If any installation procedure is uncertain, contact PUREFLOW AIRDOG for technical
assistance.
SAFETY GUIDELINES!
CAUTION! Please be sure to chock the vehicle’s tires to prevent rolling.
CAUTION! Please use proper supports when working beneath an elevated vehicle.
CAUTION! Most diesel pickups have two (2) 12volt batteries. Disconnect the battery cables
to both batteries before proceeding with the AirDog
®
II installation.
CAUTION! Vehicle frame rails should not be drilled into or welded upon.
CAUTION! Wear safety glasses when operating power tools such as drills and grinders or
when using a punch or chisel.
CAUTION! Use common sense when routing fuel lines and electrical harnesses. Keep them
away from hot exhaust components and/or moving parts. Properly secure lines to
prevent chaffing.
NOTE: The pictures used in this manual are for example only and may not be exactly the same
as your truck.