PureFlow AirDog FP-150 - 6.4L Ford 2008-2010 - Manual (Page 9)

9
AirDog
®
FP-100 & FP-150 Ford PowerStroke 2008 6.4L
Section 4 AirDog ® & Mounting Brackets
Installing the AirDog
®
& Mounting Brackets on
the Truck’s
Frame.
Figure 2 Figure 3 Figure 4
4-1 Assemble the AirDog® mounting bracket to the frame bracket. Use the spacer block to
adjust the AirDog® to clear lines and wiring harnesses on the frame. Also adjust the
assembly up or down on the frame bracket as needed for clearance.
Figure 5 Figure 6 Figure 7
FUEL IN ENGINE
4-2 Install a 1/2” Male SAE J2004 Quick
Connect x 3/8” (08J2044-3/8NPTF) into
the “ENGINE” and “FUEL IN” ports in
the AirDog®.
Figure 8
WARNING: The NPT fitting threads must be lubricated with oil or anti-seize compound
before installation to prevent galling!
NOTE: The AirDog® can be mounted on either the inside or the outside of the frame, as
space or personal choice dictates.
Outside the Frame Inside the Frame
Figure 9 Figure 10